Single-door GRP cabinets

CR1 GRP cabinet

The smallest cabinet in our single-door range. Built to order in Wales to keep compact metering and small controls safe and dry.

About this model

Built for compact metering and tight sites

The CR1 is the smallest cabinet in the single-door range. It is for compact metering, small controls, and sites where a larger box will not fit.

Pick this size when the kit is small and you still need a proper weatherproof housing, not a catalogue plastic box.

Need more height on a similar footprint? Step up to the CR2(A). If the panel is wider, look at the CR3.

Specification

Width and depth are external. Height is clear internal height.

External width	460mm
External depth	300mm
Clear internal height	610mm
Floor / base	Integral GRP membrane
Approx. weight	15kg
Doors	Single
Lock	Cylinder night latch, or stainless hasp and staple
Colour	BS4800 Green (14-C-39) or Grey (10-A-07)
IP rating	IP54
Material	Moulded GRP, fire-retardant resin

Options for this unit

Open base
Available on some single-door models. 100mm internal flange for bolting to a concrete base. Ask when you quote.
Lock
Cylinder night latch as standard, or a stainless hasp and staple for your own padlock. Other locks on request.
Colour
Standard Green or Grey. Other BS4800 and RAL colours on request.
Ventilation or backboard changes
Available on request.

Typical uses

Compact metering
Small meters and instrumentation that do not need a full roadside cabinet.
Small outdoor controls
A tight control pack that still needs weatherproof, lockable cover.
Tight sites
Footpaths, plant rooms and corners where a CR2 will not fit.
Like-for-like replace
Swapping a failed small steel box for a GRP unit that will not rust.