Walk-in GRP enclosures

CR16 GRP enclosure

A 2m-wide walk-in enclosure with 1500mm of depth. Built to order in Wales for deeper plant, with room to get in and work around it.

Request a quote Call 01639 730534

About this model

Deeper plant, and space to work around it

The CR16 keeps the shared 2000mm width and height, then gives you 1500mm of depth. That is the size for plant that needs clear space behind or beside it, not just a metre of housing.

Large double doors with hold-open stays, open base and lifting brackets as standard. Made to order in Wales, so you get a clear lead time for the quantity you need.

If a metre is enough, the CR15 is the step down. If you are heading for a near-full 2m cube, look at the CR17 or CR18.

Specification

The CR16 in numbers

Width and depth are external. Height is clear internal height. All walk-in models share 2000mm width and 2000mm CIH.

External width	2000mm
External depth	1500mm
Clear internal height	2000mm
Floor / base	Open base with 100mm flange
Approx. weight
Doors	Double
Lock	Cylinder night latch, or stainless hasp and staple
Colour	BS4800 Green (14-C-39) or Grey (10-A-07)
IP rating	IP54
Material	Moulded GRP, fire-retardant resin

Options for this unit

What you can add to this size

Lock
Cylinder night latch as standard, or a stainless hasp and staple for your own padlock. Other locks on request.
Colour
Standard Green or Grey. Other BS4800 and RAL colours on request.
Ventilation or backboard changes
Tell us what the kit needs. We will say straight whether it is a fit on this size.
Base and lifting
Open base, 100mm flange and lifting brackets as standard. Tell us about the plinth when you quote.

Typical uses

Jobs this size is made for

Deeper pump sets
Plant that needs space behind it and a person inside.
Service walk-arounds
Jobs where you cannot service everything from the door line.
Larger compounds
Outdoor housings with room on the plot for 1500mm of depth.
Stepping up from a CR15
Same width and height, more working room.