Single-door GRP cabinets

CR4 GRP cabinet

A wide single-door cabinet with a modest 400mm depth. Built to order in Wales for panels that need width and height more than they need a deep body.

Request a quote Call 01639 730534

About this model

900mm wide, without a deep footprint

The CR4 gives you 900mm of width and 1295mm clear internal height, with depth held at 400mm. It is for wide, relatively shallow panels, or sites where the cabinet cannot stand far off a wall or fence line.

If the gear is deeper than 400mm, the CR5 keeps this width and adds 135mm of depth. If 750mm of width is enough, the CR3 is the smaller step.

Need two doors for fitting out a wide panel? Look at the double-door range.

Specification

The CR4 in numbers

Width and depth are external. Height is clear internal height.

External width	900mm
External depth	400mm
Clear internal height	1295mm
Floor / base	Integral GRP membrane
Approx. weight
Doors	Single
Lock	Cylinder night latch, or stainless hasp and staple
Colour	BS4800 Green (14-C-39) or Grey (10-A-07)
IP rating	IP54
Material	Moulded GRP, fire-retardant resin

Options for this unit

What you can add to this size

Lock
Cylinder night latch as standard, or a stainless hasp and staple for your own padlock. Other locks on request.
Colour
Standard Green or Grey. Other BS4800 and RAL colours on request.
Ventilation or backboard changes
Tell us what the kit needs. We will say straight whether it is a fit on this size.
Open base
Available on some single-door models. Ask when you quote if you need to bolt to a concrete base.

Typical uses

Jobs this size is made for

Wide, shallow panels
Control gear that spreads across the backboard more than it sticks out.
Wall and fence lines
Sites where a deeper cabinet would stand too far into the path or compound.
Taller single-door installs
1295mm internal height when the CR3 is short.
Stepping up from a CR3
Same idea, more width, still one door.